Two-Phase High-Performance Hybrid Stepper Driver

Name: Two-Phase High-Performance Hybrid Stepper Driver
Brand: ZP MOTORS
SKU: ZPD245M
Availability: InStock
Rating: 5 (1 reviews)

No.ZPD245M

Product Introduction:
The ZPD245M is a highly integrated stepper motor driver developed based on a 32-bit high-performance ARM core. The driver uses discrete power components as the main drive circuit and employs current sensors for feedback, thus forming a current closed-loop system. The product offers stable performance and reliable long-term operation. It has been widely used in dispensing machines, screw machines, SMT equipment, and other applications. It can drive a full range of 20, 28, 35, 39, and 42 series two-phase stepper motors.

The ZPD245M is a new generation fully digital stepper motor driver that combines an advanced 32-bit control chip with a unique control circuit. It operates at a driving voltage of DC 20-50V and is compatible with various two-phase hybrid stepper motors with a current rating below 3.0A and an outer diameter of 42-57mm. The driver incorporates a circuit based on principles similar to servo control, which ensures smooth motor operation with minimal vibration and noise. Its positioning accuracy can reach up to 25,600 pulses per revolution. This product is widely used in medium and small-sized CNC equipment with high resolution, such as engraving machines, dispensing machines, screw driving machines, small CNC machine tools, and packaging machinery.

GET A QUOTE

Description

中文	英文
★电气参数	★Electrical Parameters
工作电压	Operating Voltage
DC24-80V;AC20~55V	DC24-80V; AC20~55V
信号电压	Signal Voltage
4.2~28V	4.2~28V
信号频率	Signal Frequency
≤150KHz	≤150KHz
信号接口	Signal Interface
控制方式	Control Method
共阴、共阳、差分	Common Cathode, Common Anode, Differential
触发方式	Trigger Method
上升沿触发，下降沿可改	Rising Edge Trigger, Falling Edge Configurable
工作模式	Operating Mode
单、双脉冲，速度10模式（需设定）	Single/Dual Pulse, Speed 10 Mode (Requires Setting)
SP01锁机电流可调，需调试工具	SP01 Locking Current Adjustable, Requires Debug Tool
参数设定	Parameter Setting
SP05脉冲平滑可调，需调试工具	SP05 Pulse Smoothing Adjustable, Requires Debug Tool
SP17电机电感量可调，需调试工具	SP17 Motor Inductance Adjustable, Requires Debug Tool
适配电机	Compatible Motors
57全系列，86系列12Nm以下电机	57 Full Series, 86 Series Motors Below 12Nm
电机释放功能有效	Motor Release Function Active
其他设定	Other Settings
掉电相位记忆功能有效	Power-Off Phase Memory Function Active
欠压、过压报警	Undervoltage, Overvoltage Alarm
故障保护	Fault Protection
过流报警	Overcurrent Alarm
过热报警	Overheat Alarm

Precautions

The input voltage must not exceed DC 50V;
The input pulse signal is effective on the falling edge; control on the rising edge requires setting internal driver parameters;
When the driver temperature exceeds 75°C, the driver stops working and the fault indicator ALM lights up. The driver must be powered on again to resume operation only after the temperature drops to 50°C. If overheating protection is triggered, please install a heat sink;
If the overcurrent (load short circuit) fault indicator ALM lights up, please check the motor wiring and other short circuit faults. After troubleshooting, power must be reset to recover;
If the no-motor fault indicator ALM lights up, please check the motor wiring. After troubleshooting, power must be reset to recover;
For optimal matching and performance, please choose Spark stepper motors.

Mode Setting

SW4	Standby Current
OFF	Half-Current Standby
ON	Full-Current Standby

Current Setting

Microstepping Setting